Jongsik Kim
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (2)
Sodium‐ion batteries (SIBs) have the potential to be a cost‐effective and sustainable solution for large‐scale energy storage systems (ESSs) due to the abundance of sodium reserves. Na 2 Ti 6 O 13 has been considered as a suitable candidate for use as an anode material in SIBs owing to its environmental friendliness, low cost, and excellent cycling stability. Despite its advantages, Na 2 Ti 6 O 13 has intrinsic limitations such as electrical conductivity. To overcome these obstacles, a sandwich‐structured Na 2 Ti 6 O 13 /reduced graphene oxide (rGO) composite is synthesized through a liquid‐phase exfoliation and restacking method using electrostatic interactions. The Na 2 Ti 6 O 13 /rGO composite showed remarkable improvement in both reversible discharge capacity and cycle stability. In comparison to bare Na 2 Ti 6 O 13 with a discharge capacity of 20.1 mAh g −1 after 500 cycles, the Na 2 Ti 6 O 13 /rGO1 composite displayed a discharge capacity of 196.5 mAh g −1 at a current density of 0.1 A g −1 and a voltage range of 0.01–2.5 V. Furthermore, the Na 2 Ti 6 O 13 /rGO1||Na 3 V 2 (PO 4 ) 3 full cell are assembled, discharging an energy density of 251.3 Wh kg −1 anode with a power density of 228.1 W kg −1 anode after 100 cycles in a voltage range of 1.0–4.0 V.
Year:
2025
Sodium‐ion batteries (SIBs) have emerged as a promising alternative to lithium‐ion batteries for large‐scale energy storage systems due to the abundance and low price of sodium. Until recently, the low theoretical capacities of intercalation‐type cathodes less than 250 mAh g −1 have limited the energy density of SIBs. On the other hand, iron oxyfluoride (FeOF) has a high theoretical capacity of ≈885 mAh g −1 as a conversion‐type cathode material for SIBs. However, FeOF suffers from poor cycling stability, rate capability, and low initial Coulombic efficiency caused by its low electrical conductivity and slow ionic diffusion kinetics. To solve these problems, doping aliovalent Ni 2+ on FeOF electrodes is attempted to improve the electronic conductivity without using a carbon matrix. The ionic conductivity of FeOF is also enhanced due to the formation of oxygen defects in the FeOF crystal structure. The FeOF‐Ni1 electrode shows an excellent cycling performance with a reversible discharge capacity of 450.4 mAh g −1 at 100 mAh g −1 after 100 cycles with a fading rate of 0.20% per cycle. In addition, the FeOF‐Ni1//hard carbon full cell exhibited a high energy density of 876.9 Wh kg −1 cathode with a good cycling stability.
Year:
2023
Collaborators (2)
achmad yanuar maulana
Assistant Professor
Dong-A University
Dukhyun Choi
-
Make your next move.
Prepare your application
Review drafts before you send them.