Günther H. Filz

Professor of Structures and Architecture

Aalto University
Country flagFinland

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

About

Günther H. Filz is an Associate Professor at Aalto University in Finland. His research areas include innovative architectural design utilizing upcycled materials, the structural analysis of bending-active elements, and the application of artificial intelligence in nuclear engineering. He has contributed significantly to the study of timber connections and geometric behaviors in construction. His recent articles reflect a commitment to sustainable practices and advanced engineering methodologies.

Articles (10)

Year:

2025

In Finland and many other countries worldwide, standard-quality wood is used as a building material in countless ways, from permanent to temporary uses as auxiliary construction and formwork. Unfortunately, formwork is difficult to clean after its use, which is why the construction industry considers it contaminated, no longer usable and, therefore, waste, and usually sends it to energy recovery. However, the remaining concrete on the formwork wood can be considered a process that can give the boards physical and aesthetic properties not previously considered. The research investigates how salvaged formwork wood performs compared to rough-sawn wood under natural weather conditions based on concrete coverage percentage. It assesses mechanical properties, ageing, and color changes, aiming to find the best fit for each board in new architectural applications such as facades while enhancing durability, and predicting future appearance for sustainability and design values. Our research employs a comprehensive approach that combines quantitative and qualitative methods, as well as architectural design techniques, to investigate the characteristics and behavior of used concrete formwork wood, considering both untreated and oil-treated variants. The properties of salvaged wood material are experimentally investigated. We (i) photographically scan each wood board to determine concrete coverage using image processing and computer vision, and (ii) conduct combined sun and water absorption tests to understand the performance and color changes of the individual boards. We show that sun exposure enhances water repellency for natural boards and both types of formwork wood, untreated and oil-treated, but comparably, formwork wood exhibits significantly lower water absorption rates. Our results identify oil-treated boards as the most water-repellent but with increased water absorption for elevated temperatures, often associated with sun exposure. These findings are used as input data to create algorithm-assisted customized architectural designs using a color gradient system. This method is a valuable tool for forecasting the surface color and its evolution over time that inversely also refers back to the identified performance of the board. We showcase façade designs on two scales, featuring a realized demonstrator using salvaged formwork wood and a façade study for the CE building at Aalto University, Espoo, Finland, both of them include ageing color gradient-based simulations alongside actual weather and climate data.

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Inspired by the traditional notched planar reciprocal frame (RF) that uses short elements to build load-bearing structures with a span longer than individual elements, we search for an innovative way of using salvaged timber for building RFs specifically connected with wooden nails. A planar rectangular slide-in RF system is proposed as a possible solution for salvaging timber in new applications and therefore also for minimising timber waste. The paper explores the potential of the proposed slide-in system considering aspects related to structure, architecture, fabrication, and assembly. Experimental and analytical investigations were carried out to understand the structural behaviour of the individual elements as well as the entire system. The feasibility of assembling was explored, and the resulting patterns and architectural spaces were illustrated. Based on the structural and architectural explorations, two design cases were physically realised. The benefits and limits are analysed, where the low-tech concept, the flexibility in layout, the predictivity of load-bearing capacity, and the ability of disassembly are highlighted, together with its limitations in load-bearing capacity and ductility.

Year:

2024

Year:

2023

Year:

2023

Year:

2022

Year:

2021

Collaborators (5)

Athanasios A. Markou

Lecturer

Aalto University

FINLAND
View details

Gengmu Ruan

Aalto University

FINLAND
View details

Gerhard Fink

Technical University of Munich

GERMANY
View details

Joonas Jaaranen

Aalto University

FINLAND
View details

Mateusz Janiszewski

Aalto University

FINLAND
View details