Il Sun Kim

Research Professor

Gangneung-Wonju National University
Country flagSouth Korea

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

About

Il Sun Kim is a Research Professor at Gangneung-Wonju National University in South Korea. His research areas include the evaluation of materials in construction, focusing on the properties and durability of mortar and concrete mixed with various functional materials. Recent works include studies on the behavior of beams reinforced with CFRP rods and the impact of superabsorbent polymers on concrete durability.

Articles (6)

The shear design of concrete members reinforced with Carbon Fiber Reinforced Polymer (CFRP) bars remains a key hurdle for engineers. This study experimentally investigates the shear behavior of normal-strength concrete members reinforced with CFRP bars without shear reinforcement subjected to monotonic loading. Specifically, this research investigates the effect of anchorage length on shear-dominated behavior, aiming to provide a novel assessment of the interaction between shear and anchorage design—two aspects that have traditionally been treated in isolation in existing studies. The experimental results revealed that all test members, regardless of reinforcement type or anchorage length, exhibited a shear strength ranging from 1.1 to 5.63 times the code-predicted values, confirming the conservatism of current design standards. This pronounced difference in the shear strength of reinforced members is attributed to (1) the unexpectedly significant contribution of dowel action because of the high tensile strength and over-reinforcement ratio, and (2) the inherent conservatism in current code equations for shear capacity. Unlike prior studies that noted conservative shear prediction, this research demonstrated that anchorage length requirements, which are typically linked to flexural design, can be significantly relaxed in shear-dominated members with safety secured. This research highlights the need to refine shear prediction models for CFRP members by incorporating parameters that account for the reinforcement ratio and the unique contribution of dowel action. Furthermore, a revision of anchorage length design standards is justified to develop a more rational and economical design for shear-dominated members.

Year:

2026

Year:

2025

Carbon-fibre-reinforced polymer (CFRP) bars are available with diverse surfaces and with a wide range of tensile strengths compared with traditional rebars. However, CFRP rods in beams require a larger cross-section than steel rebars in order to meet the required anchorage length in current design standards. The goal of this work was to compare the flexural and flexural-bond behaviours of CFRP-reinforced beams and steel-reinforced beams using four-point flexural tests. CFRP rods with thread-wrapped and sand-coated surfaces, each with distinct characteristics, were used. Additionally, two shear span/depth ratios were considered (2.5 and 3.5). The results indicated pseudo-plastic behaviour in the load–deflection curves of the CFRP-reinforced beams. This behaviour was attributed to the slip due to the reduced bond strength between the concrete and reinforcement, leading to the final failure. Based on the surface type of the CFRP rods, a cross-sectional design with the maximum load exceeding the design load was realised, even when the CFRP-reinforced beam failed to satisfy the required anchorage length. These findings suggest that the current anchorage length equations may be overly conservative, indicating the need for appropriate adjustments to the design approach.

Year:

2025

The fundamental properties and durability of mortar mixed with phytoncide, zeolite or copper powder were evaluated. For different phytoncide substitution ratios (SRs), there was no significant difference in the flow, compressive strength and flexural strength of the mortar. With an increase in the SR of zeolite, the workability decreased, while the compressive strength, flexural strength and chloride penetration resistance increased. The compressive and flexural strengths of the mortars mixed with copper powder were higher than those of the reference mix. With an increase in the SR of copper powder, the flow slightly increased and the chloride penetration resistance decreased.

Year:

2024

Year:

2021

Year:

2020

Collaborators (2)

Eun Ik Yang

Professor

Gangneung-Wonju National University

SOUTH KOREA
View details

So Yeong Choi

Research Professor

Gangneung-Wonju National University

SOUTH KOREA
View details