So Yeong Choi

Research Professor

Gangneung-Wonju National University
Country flagSouth Korea

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

About

So Yeong Choi is a Research Professor at Gangneung–Wonju National University in South Korea. Her research areas include the evaluation of functional materials in construction, durability of concrete, and non-destructive evaluation techniques for assessing concrete properties. Recent publications have focused on various aspects of mortar and concrete behavior, including the impact of antibacterial materials and superabsorbent polymers.

Articles (5)

Year:

2025

Carbon-fibre-reinforced polymer (CFRP) bars are available with diverse surfaces and with a wide range of tensile strengths compared with traditional rebars. However, CFRP rods in beams require a larger cross-section than steel rebars in order to meet the required anchorage length in current design standards. The goal of this work was to compare the flexural and flexural-bond behaviours of CFRP-reinforced beams and steel-reinforced beams using four-point flexural tests. CFRP rods with thread-wrapped and sand-coated surfaces, each with distinct characteristics, were used. Additionally, two shear span/depth ratios were considered (2.5 and 3.5). The results indicated pseudo-plastic behaviour in the load–deflection curves of the CFRP-reinforced beams. This behaviour was attributed to the slip due to the reduced bond strength between the concrete and reinforcement, leading to the final failure. Based on the surface type of the CFRP rods, a cross-sectional design with the maximum load exceeding the design load was realised, even when the CFRP-reinforced beam failed to satisfy the required anchorage length. These findings suggest that the current anchorage length equations may be overly conservative, indicating the need for appropriate adjustments to the design approach.

Year:

2025

The fundamental properties and durability of mortar mixed with phytoncide, zeolite or copper powder were evaluated. For different phytoncide substitution ratios (SRs), there was no significant difference in the flow, compressive strength and flexural strength of the mortar. With an increase in the SR of zeolite, the workability decreased, while the compressive strength, flexural strength and chloride penetration resistance increased. The compressive and flexural strengths of the mortars mixed with copper powder were higher than those of the reference mix. With an increase in the SR of copper powder, the flow slightly increased and the chloride penetration resistance decreased.

Year:

2024

Year:

2023

Year:

2021

Collaborators (2)

Eun Ik Yang

Professor

Gangneung-Wonju National University

SOUTH KOREA
View details

Il Sun Kim

Research Professor

Gangneung-Wonju National University

SOUTH KOREA
View details