Isabelle Pison

Associate professor (permanent position)

Université de Versailles Saint-Quentin-en-Yvelines
Country flagFrance
ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (21)

Top-down methane CH4 flux estimates involve large uncertainties stemming from three main sources: (1) the coverage of the observing system, (2) systematic and random errors in the observation data and the priors and (3) errors in the atmospheric transport model. Quantifying these uncertainties is challenging, and methodological studies suggest they can be substantial. While global-scale uncertainties in total CH4 emissions are relatively small (±5%), they increase significantly at regional scales exceeding ±20% for high latitudes. Differences in satellite and in situ measurement uncertainties, as well as variations in data density, further influence the precision of CH4 flux estimates. Sectoral disaggregation of uncertainties improves error attribution, leading to more reliable regional flux assessments and trend detection. Its benefits are amplified in high-emission regions due to larger absolute uncertainties and more complex source mixtures.

Year:

2025

China is one of the largest emitters of nitrogen oxides NOx (= NO + NO2) worldwide, and up-to-date estimates are crucial as the country faces rising pressure to curb emissions. We estimate NOx emissions over Eastern China (101.75–132.25° E; 17.75–50.25° N) from 2019 to 2021, focusing on the impacts of COVID-19 and the Chinese Lunar New Year (LNY). Using high-resolution NO2 observations from TROPOMI, onboard the Sentinel-5 Precursor satellite, our estimates are at the regional, national and provincial scales. They are produced using the Community Inversion Framework (CIF), coupled to the CHIMERE regional chemistry transport model at 0.5° resolution. Our results show a sharp drop in NOx emissions by −40% in February 2020, as compared to 2019, driven mostly by lockdown-related mobility restrictions, and partially due to LNY festivities. Provincial reductions in February 2020 include −38% in Shanghai, −29% in Qinghai, −31% in Jiangsu, −36% in Hubei, −24% in Henan, and −16% in Beijing. Total NOx emissions (anthropogenic + biogenic) over Eastern China fell by 0.2 TgNO2/year in 2020 vs. 2019, but rose again in 2021, exceeding 2019 levels by +4% (16.7 TgNO2 in 2021 vs 16.0 TgNO2 in 2019). Our estimates of recent past years offer insights to guide future strategies and policies to reduce NOx emissions in China and its provinces. These results highlight the advantages of combining high dimensional variational inversion methods with high-resolution satellite data, to strengthen air quality monitoring and support more effective regulations.

Year:

2025

China is one of the largest emitters of nitrogen oxides NOx (= NO + NO2) worldwide, and up-to-date estimates are crucial as the country faces rising pressure to curb emissions. We estimate NOx emissions over Eastern China (101.75–132.25° E; 17.75–50.25° N) from 2019 to 2021, focusing on the impacts of COVID-19 and the Chinese Lunar New Year (LNY). Using high-resolution NO2 observations from TROPOMI, onboard the Sentinel-5 Precursor satellite, our estimates are at the regional, national and provincial scales. They are produced using the Community Inversion Framework (CIF), coupled to the CHIMERE regional chemistry transport model at 0.5° resolution. Our results show a sharp drop in NOx emissions by −40% in February 2020, as compared to 2019, driven mostly by lockdown-related mobility restrictions, and partially due to LNY festivities. Provincial reductions in February 2020 include −38% in Shanghai, −29% in Qinghai, −31% in Jiangsu, −36% in Hubei, −24% in Henan, and −16% in Beijing. Total NOx emissions (anthropogenic + biogenic) over Eastern China fell by 0.2 TgNO2/year in 2020 vs. 2019, but rose again in 2021, exceeding 2019 levels by +4% (16.7 TgNO2 in 2021 vs 16.0 TgNO2 in 2019). Our estimates of recent past years offer insights to guide future strategies and policies to reduce NOx emissions in China and its provinces. These results highlight the advantages of combining high dimensional variational inversion methods with high-resolution satellite data, to strengthen air quality monitoring and support more effective regulations.

Year:

2025

China is one of the largest emitters of nitrogen oxides NOx (= NO + NO2) globally. With ongoing efforts and global pressure to reduce its emissions, up-to-date estimates of NOx emissions remain essential. In this study we focus on the evolution of NOx emissions over Eastern China (101.75–132.25° E; 17.75–50.25° N) between 2019 and 2021, including the analysis of the impact of the COVID-19 outbreak and the Chinese Lunar New Year national break (LNY) on NOx emissions. We exploit the high spatial resolution and coverage of the TROPOMI Sentinel-5 Precursor nitrogen dioxide (NO2) observations, and provide an estimate of this evolution down to the level of Chinese provinces. We assimilate TROPOMI NO2 observations in NOx atmospheric inversions based on the variational inversion drivers of the Community Inversion Framework (CIF), coupled to a 0.5° resolution configuration of the CHIMERE regional chemistry transport model. Our results show a decrease in NOx anthropogenic emissions in most of Eastern China during early 2020 compared to 2019. This decrease approaches -40 % in February 2020 as compared to 2019 due to i) the lockdowns and strict regulations on mobility associated with the COVID-19 outbreak (lockdowns extended from 23 January to 8 April in Wuhan, and from late January or early February 2020 in other parts of China, extending till March 2020) and ii) the celebrations of the LNY that took place during February 2020, before the lockdowns were imposed. In some Chinese provinces, such as Shanghai, Qinghai, Jiangsu, Hubei, Henan and Beijing, the reductions in NOx emissions were -38 %, -29 %, -31 %, -36 %, -24 %, and -16 % respectively during February 2020 relative to 2019. The annual total (anthropogenic + biogenic) emissions of NOx in Eastern China decreased by 0.2 TgNO2/year in 2020, compared to 2019. However, in 2021, our estimates show an annual increase of +4 % in NOx emissions as compared to 2019, amounting to 16.7 TgNO2/year in 2021. This study advances emissions quantification by delivering NOx emissions down to the scale of Chinese provinces, a refinement that is not always addressed in regional inversions. Our approach, therefore, makes it possible to evaluate targeted policy interventions by resolving sub-national emissions. This shows how crucial it is to use high-resolution data when working to improve air quality and address climate change.

Year:

2025

Satellite observations from the Sentinel-5P TROPOMI instrument, combined with inverse modeling, provide a valuable resource for quantifying regional methane (CH4) emissions. This study compares the emissions estimated from variational inversions in 2019 over Europe (0.5° resolution) assimilating three TROPOMI products of dry-column methane mole fractions (XCH4). The SRON (v2.4, operational product), BLENDED (v1.0), and WFMD (v1.8) products are retrieved from distinct algorithms. They differ in coverage, error characterization, and XCH4 spatial distribution. Results indicate that the largest contributions to XCH4 differences may be attributed to aerosol scattering and sensitivity to albedo. The derived 2019 European CH4 emission budgets show a relative increase of +2 % for SRON, and a decrease of -1 %, -33 % and -9 %, respectively, for BLENDED, WFMD and surface-based inversions. Seasonal emissions are highly correlated across the inversions. Spatial emission patterns and optimized boundary conditions are similar for the non-independent SRON and BLENDED but differ substantially from WFMD. Evaluation with independent surface stations shows error reduction for about half of the sites, with BLENDED performing best. However, no product is systematically closer to the emissions estimated when assimilating surface observations. Observing System Simulation Experiments (OSSEs) are used to disentangle the drivers of differences between the posterior emissions. They reveal that observation density and errors, but also averaging kernels and prior profiles play a key role in the inversion's capacity to constrain the emissions. Using consistent error definition and quality filters increases the consistency of the OSSEs, paving the way for more consistent emission estimates.

Year:

2025

There are great expectations about the detection and the quantification of NOx emissions using NO2 tropospheric columns from satellite observations and inverse systems. This study assesses the potential of the OMI-QA4ECV and TROPOMI satellite observations to improve the knowledge of European NOx emissions at the regional scale and to inform about the spatio-temporal variability of NOx anthropogenic emissions in 2019 compared to 2005, at the resolution of 0.5° over Europe. We first characterize the level of consistency between retrievals from OMI-QA4ECV and from the more recent reprocessing of the TROPOMI data, called TROPOMI-RPRO-v02.04, and the implications of the possible inconsistencies for inversions. Furthermore, starting from European emission estimates from the TNO-GHGco-v3 inventory for the year 2005, regional inversions using the Community Inversion Framework coupled to the CHIMERE chemistry-transport model and assimilating satellite NO2 tropospheric columns from OMI and TROPOMI have been performed to estimate the European annual and seasonal budgets for the year 2019. Both the OMI and TROPOMI inversions show decreases in European NOx anthropogenic emission budgets in 2019 compared to 2005. Nevertheless, the magnitude of the reductions of the NOx anthropogenic emissions is different with OMI and TROPOMI data, with decreases in EU-27 + UK between 2005 and 2019 of 16 % and 45 %, respectively. A TROPOMI inversion giving more weight to the satellite data becomes consistent with the independent TNO-GHGco-v3 inventory for the year 2019, with annual budgets for EU-27 + UK showing absolute relative difference of only 4 %. These TROPOMI inversions are therefore in agreement with the magnitude of the decline in NOx emissions declared by countries, when aggregated at the European scale. However, our results – with OMI and TROPOMI data leading to different magnitudes of corrections on NOx anthropogenic emissions – suggest that more observational constraints would be required to sharpen the European emission estimates.

Year:

2025

Atmospheric inversions are widely used to evaluate and improve inventories of methane (CH4) emissions on scales ranging from global to national and beyond, combining observations with atmospheric transport models. This study uses the dense network of in situ stations of the Integrated Carbon Observation System (ICOS) to explore how well in situ data can constrain European CH4 emissions. Following the concept of inter-comparison studies of the atmospheric tracer transport model inter-comparison Project (TransCom), a CH4 inverse inter-comparison modeling study has been performed, focusing on Europe for the period 2006–2018. The aim is to investigate the capability of inverse models to deliver consistent flux estimates at the national scale and evaluate trends in emission inventories. Study participants were asked to perform inverse modelling computations using a common database of a priori CH4 emissions and in-situ observations as specified in a protocol. The participants submitted their best estimates of CH4 emissions for the 27 European Union (EU) member states, the United Kingdom (UK), Switzerland, and Norway. Results were collected from 9 different inverse modelling systems, using 7 different global and regional transport models. The range of outcomes allows us to assess posterior emission uncertainty, accounting for transport model uncertainty and inversion design decisions, including a priori emission and model-data mismatch uncertainty. This paper presents inversion results covering 15 years, that are used to investigate the seasonality and trends of CH4 emissions. The different inversion systems show a range of a posteriori emission adjustments, pointing to factors that should receive further attention in the design of inversions such as optimising background concentrations. Most inverse models increase the seasonal cycle amplitude, by up to 400 Gg month-1, with the largest adjustments to the a priori emissions in Western and Eastern Europe. This might be due to underestimation of emissions from wetlands during summer or the importance of seasonality in other microbial sources, such as landfills and waste water treatment plants. In Northern Europe, absolute flux adjustments are comparatively small, which could imply that the emission magnitude is relatively well captured by the a priori, though the lower station density could contribute also. Across Europe, the inverse models yield a similar decreasing trend in CH4 emissions compared to the a priori emissions (-12.3 % instead of -9.1 %) from 2006 to 2018. While both the a priori and the a posteriori trend for the EU-27 are statistically significant from zero, their difference is not. On subregion scale, the differences between a posteriori and a priori trends are more statistically significant over regions with more in-situ measurement sites, such as over Western and Southern Europe. Uncertainties in the a priori anthropogenic emissions, such as in the agriculture sector (cows, manure), or waste sector (microbial CH4 emissions), but also in the a priori natural emissions, e.g. wetlands, might be responsible for the discrepancies between the a priori and a posteriori emission trends in Western and Southern Europe. Our results highlight the importance of improving details in the inversion setup, such as the treatment of lateral boundary conditions and the model representation of measurement sites, to narrow the uncertainty ranges further.

Year:

2025

Satellite observations of total column methane atmospheric mixing ratios (XCH4) combined with atmospheric transport inverse modeling offer enhanced capabilities to monitor the methane (CH4) emissions at regional scale.The TROPOspheric Monitoring Instrument (TROPOMI) onboard the Sentinel-5 Precursor (S5P) satellite provides XCH4 with global daily coverage and a relatively high (5.5×7 km²) horizontal resolution since 2017. Widely used for the hotspot detection and quantification, TROPOMI-CH4 data is also exploited in regional and global CH4 flux inversions.Three retrieval products of XCH4are produced and routinely updated from TROPOMI: the SRON official product, the WFMD product by the University of Bremen and the BLENDED product by the University of Harvard. The official dataset (v2.04) relies on the RemoTeC full-physics algorithm, which retrieves atmospheric methane concentration alongside atmospheric scattering properties. The WFMD scientific product is based on the University of Bremen’s Weighting Function Modified Differential Optical Absorption Spectroscopy (WFM-DOAS) and a machine learning classifier for quality filtering. The BLENDED product combines S5P-TROPOMI and GOSAT-TANSO retrievals. It is a post-processed of the official TROPOMI product, correcting biases using a machine learning model trained on collocated observations from both instruments. Despite recent advances in retrieval techniques, inter-product comparisons reveal notable differences in quality filtering, observed XCH₄ values, and associated uncertainties. It leads to discrepancies in flux estimates derived from inversions, particularly at local and country scales.We assimilate these three TROPOMI XCH4products into regional atmospheric inversions of CH₄ emissions over Europe at a 0.5°×0.5° resolution, for the year 2019. The inversions are conducted using the CHIMERE transport model within the inverse modeling platform Community Inversion Framework (CIF). In situ surface measurements are used for validation. We investigate the primary factors contributing to the inter-product differences, including albedo, aerosols and striping patterns. We also perform Observing System Simulation Experiments (OSSE) with synthetic pseudo-observations and perturbed prior fluxes to assess the sensitivity of the system to observations and isolate the causes of the differences in inversion results. We inquire into the impact of observation density, retrieval errors and inter-product biases on the posterior fluxes. The resulting methane emissions budgets are compared at pixel, country and regional scales, providing insights into the consistency of TROPOMI-based regional inversions.

Year:

2025

Methane (CH4) emissions from South America have been estimated to account for approximately 15% of global emissions over the past decade. While natural emissions are predominantly driven by wetlands, anthropogenic emissions include contributions from livestock and landfills. However, bottom-up estimates remain highly uncertain, particularly for wetland contributions. The top-down approach, based on atmospheric transport inverse modeling, offers a critical tool for enhancing the monitoring of regional CH4 emissions. Given the sparse network of in-situ measurements and limited aircraft campaigns in the region, satellite observations of total column methane mixing ratios (XCH4) provide a valuable source of observations for inverse modeling.The TROPOspheric Monitoring Instrument (TROPOMI) aboard the Sentinel-5 Precursor (S5P) satellite, launched in 2017, provides XCH4 with global daily coverage and a relatively high (5.5×7 km²) horizontal resolution. Three different products are derived from the raw spectra measurements and are used in this study: the official product by SRON, the WFMD product by the University of Bremen and the BLENDED product by the University of Harvard. While widely used for detecting localized methane plumes linked to super-emitters, TROPOMI CH4 data also support regional and global flux inversions, enabling improved mapping of CH4 emissions. In 2019, TROPOMI provided over 4 million observations across South America, though with uneven spatial coverage, particularly limited over the tropical region due to cloud cover.We assimilate the TROPOMI XCH4observations into regional atmospheric inversions of CH4 emissions over South America at a 0.2°×0.2° resolution, for 2019. The inversions are performed with the CHIMERE transport model coupled with the inverse modeling platform Community Inversion Framework (CIF). We first compare prior emission dataset, evaluating sector-specific uncertainties and spatial-temporal correlations within the background error covariance (B). The study then assesses system sensitivity to key input datasets and parametrization, including deep convection modeling, prior datasets and TROPOMI product selection, and optimization parameters. Additionally, the response of simulated XCH4 to sectoral contributions is analyzed. Particular focus is given over the tropical region and especially the Amazon basin, where extensive wetland emissions and low satellite observation coverage pose significant challenges. Finally, posterior CH4 emission budgets are presented at local, country, and regional scale, with detailed analysis of sectoral contributions from livestock, landfills, and wetlands, offering insights into the drivers of South America’s methane emissions.

Year:

2025

CH4 is the second anthropogenic contributor to global warming after CO2. Monitoring methane emissions is therefore essential in order to mitigate climate change. Satellite missions have the potential to offer more spatial coverage than ground stations, however their coverage is currently insufficient. This leads to the development of satellite missions that can be envisaged as constellations. For this purpose a concept currently studied is Nanocarb, relying on the patent WO2018002558A1 (ImSPOC). This instrument is a compact and robust spectral imaging concept relying on a static array of Fabry-Perrot interferometers to retrieve partial interferograms of the incident radiance. This study is focused on developing and using the appropriate tools and models to simulate the flux restitution performances of a methane focused Nanocarb instrument with two intertwined inverse approaches.We have developed an end-to-end simulation chain of the flux restitution by the instrument Nanocarb. First an atmospheric situation is simulated from an inventory such as TNO's by the chemistry transport model Chimere. Then this atmospheric situation is used to simulate Nanocarb measurements, with a direct and backward ImSPOC conception and processing software called MEDOC which relies on the radiative transfer code 4A-OP. Those simulated measurements have realistic noise added and are used to recover atmospheric methane columns. Eventually this new atmospheric situation allows for the retrieval of atmospheric methane fluxes, thanks to the Community Inversion Framework (CIF), coupled with Chimere. Those fluxes can be compared to the initial situation to quantify the introduced biases.We present this simulation chain, and specifically developments made on Medoc and columns obtained for an atmospheric simulation in the north of France. This simulation chain aims to model the flux retrieval ability of the instrument Nanocarb for point sources and area sources of methane.

Year:

2025

Year:

2025

Year:

2025

Year:

2025

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Collaborators (23)

Sander Houweling

University of Amsterdam

NETHERLANDS
View details

Arjo Segers

Netherlands Organisation for Applied Scientific Research

NETHERLANDS
View details

Antoon Meesters

University of Amsterdam

NETHERLANDS
View details

Bo Zheng

Tsinghua University

CHINA
View details

Prabir K. Patra

Professor (Special Appointment)

Hiroshima University

JAPAN
View details

Luka Ilić

Recognised Researcher

Barcelona Supercomputing Center

SPAIN
View details

David Bastviken

Professor

Linköping University

SWEDEN
View details

Christoph Gerbig

Senior Researcher

Max Planck Institute for Biogeochemistry

GERMANY
View details

Michael Schulz

Norwegian Meteorological Institute

NORWAY
View details

Henk Eskes

Royal Netherlands Meteorological Institute

NETHERLANDS
View details

Dmitry Belikov

Chiba University

JAPAN
View details

Andreas Richter

University of Bremen

GERMANY
View details

Dilek Savas

Institut Pierre-Simon Laplace

FRANCE
View details

Philippe Ciais

Université Paris-Saclay

FRANCE
View details

Athanasios Tsikerdekis

Royal Netherlands Meteorological Institute

NETHERLANDS
View details

Rona Thompson

Senior Scientist

Norwegian Institute for Air Research

NORWAY
View details

Simon Chabrillat

Staff scientist

Royal Belgian Institute for Space Aeronomy

BELGIUM
View details

Aki Tsuruta

Finnish Meteorological Institute

FINLAND
View details

Maria Tenkanen

Finnish Meteorological Institute

FINLAND
View details

Giuseppe Etiope

Istituto Nazionale di Geofisica e Vulcanologia

ITALY
View details

Ronny Lauerwald

Université Paris-Saclay

FRANCE
View details

Dominik Brunner

group leader

Empa

SWITZERLAND
View details

Guido van der Werf

Wageningen University & Research

NETHERLANDS
View details