Jean-Philippe Poirot-Crouvezier

Ingénieur-chercheur, Directeur de recherches

Commissariat à l’énergie atomique et aux énergies alternatives Direction CEA Tech
Country flagFrance

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (6)

Proton Exchange Membrane Fuel Cells (PEMFCs) are seen as an alternative for heavy-duty transportation electrification. Powered by a green hydrogen source, they can provide high efficiency and low carbon emissions compared to traditional fuels. However, to be competitive, these systems require high reliability when operated in real-life conditions, as well as safe and efficient operating management. In order to achieve these goals, the X-in-the-loop (also called model-based design) methodology is well suited. It has been largely adopted for PEMFC system development and optimisation, as they are complex multi-component systems. In this paper, a systematic analysis of the scientific literature is conducted to review the methodology implementation for the design and improvement of the PEMFC systems. It exposes a precise definition of each development step in the methodology. The analysis shows that it can be employed in different ways, depending on the subsystems considered and the objectives sought. Finally, gaps in the literature and technical challenges for fuel cell systems that should be addressed are identified.

Year:

2025

Performances of proton exchange membrane fuel cells (PEMFCs) is impacted by the physical properties of the gas diffusion layer (GDL). These properties, including thickness and porosity, are irreversibly modified by diverse processes, notably by the clamping of the PEMFC or the swelling of the membrane during cell operation. This can result in irreversible deformation of the GDL, with consequent impact on the performance and durability of the PEMFCs. This phenomenon, which is difficult to apprehend experimentally, is also challenging to investigate numerically. An elastoplastic law related to the irreversible strain of the GDL after compression is proposed in this study and implemented in a finite element model. Variations in GDL’s properties during humidity and temperature cycles are studied depending on PEMFC clamping methods using numerical simulations. The influences of processing conditions, i.e. the membrane electrode assembly hot pressing process, on GDLs properties are also investigated numerically. The results demonstrate the necessity to take into account the evolution of the mechanical properties of PEMFC components, with a significant influence of clamping process, life load and hot pressing process on the physical properties of the GDL as thickness, porosity, or intrusion in the gas channels.

Year:

2024

To address the performance and lifetime limitations of Proton Exchange Membrane Fuel Cells, it is essential to have a comprehensive understanding of the operating heterogeneities at the cell scale, requiring the test of a wide range of operating conditions. To avoid experimental constraints, numerical simulations seem to be the most viable option. Hence, there is a need for time-efficient and accurate cell-scale models. In this intention, previous works led to the development and the experimental calibration of a pseudo-3D model of a full-size cell in a stack. To further reduce the computation time, a new spatially averaged, multi-physics, single-phase, non-isothermal, steady state pseudo-3D model is developed and calibrated with the results of the preceding model. Particularly, it captures the influence of the coolant on temperature and water mappings in the cell. Moreover, a new methodology is proposed to calibrate the electrochemical cell voltage law for new membrane-electrode assemblies. The emulation of the local operation conditions in large active surface area is realized with a small differential cell, avoiding the testing of large single cells or stacks. Subsequently, simulations are conducted to investigate the impact of the coolant temperature gradient, coolant outlet temperature and gas relative humidity.

Year:

2024

Year:

2024

Year:

2024

Year:

2023

Collaborators (2)

Patrice MELE

Professeur des universités

Université Savoie Mont-Blanc

FRANCE
View details

Christophe Carral

Assistant Professor

Laboratoire des Sciences des Procédés et des Matériaux

FRANCE
View details