Marco Fasan

The mechanical analysis of photovoltaics and building integrated photovoltaics is a key step for their optimal design and certification, and requires careful consideration, alongside solar power, durability and functionality issues. The solar cells are encapsulated in thin interlayers that are usually composed of a viscoelastic Ethylene–Vinyl Acetate compound, and protected by thin glass and/or plastic layers. This paper investigates the out-of-plane bending response of a full-scale commercial PV module and focuses attention on the shear bonding efficiency of the thin encapsulant for quasi-static and dynamic mechanical considerations. The parametric analytical analysis, carried out in this study for a laminated glass plate, highlights the possible consequences of the viscoelastic shear coupling on the cross-section load-bearing demand in the covers. As a direct effect of severe operational conditions (i.e., ageing, non-uniform/cyclic thermal gradients, humidity, extreme mechanical/thermal loads, etc.) the shear rigidity and adhesion of these films can suffer from repeated/progressive modification and even degradation, and thus induce major stress and deflection effects in the out-of-plane mechanical response of the PV module components. The minimum shear bond efficiency required to prevent mechanical issues is calculated for various configurations of technical interest. Accordingly, it is shown how the quasi-static and dynamic mechanical performance of the system modifies as a function of a more rigid or weak shear coupling.