Myrto Papadopoulou
Assistant Professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
About
Dr. Myrto Papadopoulou is an Assistant Professor at Uppsala University, Sweden. Her research focuses on seismic imaging and characterization techniques relevant to geological carbon storage, with recent publications addressing advancements in seismic methods applied to sites in Denmark and Sweden. She is particularly interested in combined seismic data acquisition and analysis to improve geological exploration outcomes.
Articles (10)
Accurate near-surface characterization is essential to ensure public safety and operational integrity in geological carbon storage (GCS) projects. This study focuses on the imaging of near-surface features within the Havnsø domal structure, a potential GCS site in northern-central Denmark, using seismic data acquired in 2022. We combined high-resolution seismic reflection imaging with first-break travel-time tomography to characterize features and key horizons within Quaternary sediments and the Chalk Group. We achieved more accurate and detailed near-surface sections down to 500 m by migrating and time-to-depth-converting seismic sections using the tomographic velocities. This approach, along with superimposed tomography-based models, revealed important features such as buried valleys, Chalk Group horizons and fault zones. Our results demonstrate that the potential GCS prospect area is suitable for long-term CO 2 storage, supported by the lack of major faults in situ and in the vicinity of buried valleys.
Year:
2025
Advancements in technologies and acquisition techniques in reflection seismology have increased the quantity of data that can be recorded in a single survey. The spreading of three‐component (3C) recorders has resulted in multicomponent data acquisitions to be more cost‐effective than single‐component (1C) acquisitions, making 3C datasets more common. Therefore, the need for processing workflows aiming to enhance S‐wave from P‐wave‐designed acquisitions is increasing. As part of a larger survey for geological carbon storage site investigations, a 1‐km‐long seismic profile was acquired near the city of Randers in Denmark and is considered in this study. The acquisition setup consisted of two vertical vibrating sources, operating every 10 m, recorded simultaneously from a 1C nodal array, 10 m spaced and a landstreamer system, equipped with 60 3C micro‐electro‐mechanical sensors in 2 m intervals. Analysis of the 3C data recorded from the landstreamer system shows PP‐, PS‐ and SS‐wavefield reflections from a shallow horizon nearly 50 m below the ground surface. Although the PP‐wavefield data processing was straightforward, the SS‐wavefield imaging was challenged by strong surface waves recorded in the data, thus requiring a tailored workflow for its processing. The workflow employs a reflection‐picked moveout correction specifically designed on the observed reflections with respect to the data acquisition geometry. Results demonstrate that this tailored method is effective, yielding improved continuity of the SS‐wavefield reflectivity with respect to the traditional normal moveout corrections. P‐ and S‐wave interval velocity models are estimated in depth, and their ratio is computed to complement the geological interpretations of the shallow subsurface. Similar imaging scenarios can benefit from the proposed method to sharpen SS‐wavefield reflections in stacked section.
Year:
2025
Understanding the structural intricacies of subsurface halokinetic formations is crucial for various geological applications, including geological capture and storage (geological carbon storage (GCS)). This study focuses on the seismic imaging of the Gassum structure in eastern Jutland, Denmark, employing high‐resolution, dual‐element acquisition, and processing techniques. The investigation aims to unravel details in the evolution of the salt dome and its implications for GCS potential. High‐resolution seismic data processing and interpretation reveals a skewed dome structure with steeper flanks on the western and northern sides, characterized by faults and stratigraphic thinning. The asymmetric growth of the dome suggests uneven salt loading during its genesis, influencing local stress fields and structural development, with evidence of syn‐tectonic subsidence that produced salt welds. This is supported by the presence of stratigraphic wedges and an increased depth of imaged horizons within steeper flanks of the dome. A mild piercement of the salt into overlying sediments, onlapping features, and the presence of normal faults that originate from the dome apex and extend radially, all indicate a reactive piercement process in the salt pillow's development stage. This produced an extensional regime in overlying strata, inducing sequence thinning and graben structures. Analysis of reservoir and seal properties unveils adequate conditions for GCS, with a continuous reservoir and thick primary and secondary seals. However, the presence of faults intersecting these formations raises concerns regarding long‐term storage stability. Further investigations into reservoir porosity, migration paths, and volumetric analysis are warranted for conclusive GCS assessments.
Year:
2025
Strong global actions for climate change include carbon capture and storage (CCS) as a feasible solution to reach carbon neutrality and raise opportunities for detailed subsurface investigations. An acquisition set-up designed for onshore-offshore zones was maximized for wide-scale high-resolution structural imaging and implemented to cover a domal structure of interest for CCS utilization close to the town of Havnsø (Denmark). The challenges of the combined acquisition and processing of land and marine multisensor data along a 42 km seismic profile are analyzed, the suggested solutions are applied, and the limitations are discussed. On the onshore side, a nodal array and a seismic landstreamer system were simultaneously used, whereas along the transition zone, a marine seismic streamer and ocean-bottom seismometers were added to record the seismic response generated by two seismic vibrator sources. The adopted sensing domains (velocity, acceleration, and pressure) were studied, and different processing steps were evaluated to enable their processing and subsequent data set merging. Results suggest, as the best approach, a separate prestack processing of the different data sets and the computation of new geometries and new surface-consistent residual static correction after their merging. The data acquired in the transition zone illuminate, for the first time, the subsurface geology of the region, delineating an expected domal closure. The final seismic section shows high continuity of the reflections with good resolution along the entire profile, identifying the main reservoir structure and the surrounding areas, which are important to ensure reservoir integrity and safe exploitation over longer time scales. Shallow and deep reflections are consistent with the stratigraphic column from a well log near the profile. The presented study shows a comprehensive workflow for processing such a multisensor data set in onshore and transition zone settings.
Year:
2024
Year:
2024
Year:
2023
Year:
2023
Year:
2023
Year:
2020
Year:
2020
Collaborators (6)
LAURA VALENTINA SOCCO
Full Professor
Delft University of Technology
Ole Rønø Clausen
VIP, Associate Professor
Aarhus University
Alireza MALEHMIR
Professor in applied geophysics
Uppsala University
Emilia Koivisto
University of Helsinki
Thomas Funck
Senior Research Scientist
Geological Survey of Denmark and Greenland
Magdalena Markovic
Assistant Professor
Uppsala University
Make your next move.
Prepare your application
Review drafts before you send them.