Peter Kuipers Munneke

Assistant professor

Utrecht University
Country flagNetherlands

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (11)

The firn layer regulates how an ice-sheet responds to climate change by modifying how changes in surface temperature, snow accumulation and ablation affect the ice-sheet mass balance. Firn properties are often simulated with a firn densification model. Firn models are forced with surface mass balance components, surface energy balance components and/or meteorological variables. In literature, a variety of climate forcing time steps have been used to force such firn models, ranging from 3-hours to 1-day, 1-month, or even annual. To investigate the impact of these different time steps, we force the firn densification model IMAU-FDM with different climate forcing time steps at the surface for the Antarctic Peninsula and southern Greenland Ice Sheet. We show that the modelled firn layer contains more pore space for larger forcing time steps, and that locations with limited firn pore space due to seasonal melt are most sensitive. The climate forcing time step impacts the creation of pore space by snowfall and the depletion of pore space by snowmelt and firn densification. The key in causing the differences in firn pore space is the presence or absence of a diurnal cycle in the input data. A climate forcing time step greater than a day allows for a non-physical coexistence of snowmelt and sub-zero surface temperatures, leading to immediate shallow refreezing of meltwater. Subsequent melting removes refrozen ice rather than porous firn, reducing the amount of firn air that is lost through melting. Therefore, the decoupled temperature and snowmelt in the upper layers give more firn air with a climate forcing time step larger than a day. We also found that firn density parameterizations can become unsuitable when applied outside the physical conditions or climate forcing time step on which they are based. These parameterizations lead to unrealistic firn densification and accumulation behavior in the model. We argue that (1) firn models require a timestep small enough to capture at least the diurnal cycle, (2) use of parameterizations should be critically assessed and used consistently with the way they were originally developed, and (3) the forcing time step should be considered when interpreting firn model output.

Year:

2026

We present a dataset of Antarctic annual surface melt rates (6.25 km resolution, 2012–2021) from 19 GHz Special Sensor Microwave Imager/Sounder (SSMIS). First, melt occurrence is detected via thresholds for brightness temperature, diurnal variation, and winter anomaly, calibrated with Automatic Weather Station (AWS) data. Second, AWS-driven surface energy balance modeling yields an empirical relation between annual melt days and water-equivalent melt volume. SSMIS-derived melt volumes show good agreement with AWS-based melt estimates (R2 = 0.83). Compared to QuikSCAT and RACMO2.4 outputs, SSMIS captures a similar spatial melt pattern but estimates a total melt volume approximately 15 % lower than RACMO, on the decadal average.

Year:

2025

In cooperation with multiple institutes, the Institute for Marine and Atmospheric research Utrecht (IMAU) at Utrecht University has operated automated weather stations (AWS) at 19 locations on the Antarctic ice sheet from 1995 through 2022. Besides standard meteorological measurements (pressure, temperature, humidity, wind speed & direction), these stations include measured shortwave and longwave radiation components and surface height, thereby allowing for the reliable in situ quantification of the surface energy balance (SEB) and surface mass balance (SMB) at (two-)hourly temporal resolution. This unique dataset can be used for climate model evaluation and development, for the validation of remote sensing products, for the quantification of long term climatological changes, for the interpretation of ice cores, and for process understanding in general. This paper describes the dataset and the applied measurement corrections. The total dataset contains 154 station-years of data, of which 65 % include both SEB & SMB observations, and is available at https://doi.pangaea.de/10.1594/PANGAEA.974080 (Van Tiggelen et al, 2024).

Year:

2025

The IMAU Firn Densification Model (IMAU-FDM) is a 1D, semi-empirical model that simulates the evolution of snow grain size, firn density, firn air content, temperature, and liquid water content. It has been used primarily to investigate future surface changes over both Greenland and Antarctica, as well as for continent-wide estimates of mass change from satellite altimetry. Here, we will present a streamlined, updated IMAU-FDM with results for the Greenland Ice Sheet extended back to 1940 and through to 2023. IMAU-FDM is driven by ERA5, dynamically downscaled by the regional climate model RACMO 2.3p2 to 5.5 km^2 resolution. We will present timeseries of firn air content, liquid water content, and ice slab presence across the Greenland Ice Sheet, and initial results of future runs through 2100.

Year:

2025

Since 1995, the Institute for Marine and Atmospheric research Utrecht (IMAU) at Utrecht University has operated automatic weather stations (AWS) at 20 different locations on the Antarctic ice sheet. In cooperation with multiple institutes, AWS were installed in Dronning Maud Land, on the East Antarctic Plateau, on the remnants of the Larsen B ice shelf, and on the Larsen C and Roi Baudouin ice shelves. Besides standard meteorological observations (wind speed, wind direction, air temperature, humidity, surface pressure), these stations also recorded the four components of net surface radiation, as well as surface height change. That allows for a reliable estimation of the surface energy balance (SEB) and surface mass balance (SMB) at hourly temporal resolution. Due to the harsh climatic conditions and limited number of maintenance visits, the data require a thorough quality control procedure and specific sensor corrections.Here we present the corrections that were applied to the measurements, as well as the procedure that was implemented to flag suspicious samples. We give an overview of the first quantification of the long-term variability in SEB components, as well as the strong contrast between the high-melt locations near the grounding lines of ice shelves and the dry interior of the Antarctic ice sheet. In total, 152 station-years of observations are available, of which 78% are non-flagged simultaneous observations of all meteorological and radiation parameters.This dataset may be used for the evaluation of climate models and for the interpretation and validation of remote sensing products, but also for the quantification of climatological changes and for process understanding in general. The data are openly available at https://doi.pangaea.de/10.1594/PANGAEA.974080.

Year:

2025

Surface melt is a critical boundary condition for the hydrological system of the Antarctic Ice Sheet, impacting processes such as mass balance and ice shelf stability. However, its quantification remains challenging due to the scarcity of in-situ measurements and the spatial variability of melt processes. While remote sensing offers extensive coverage, estimating melt rates - beyond binary melt detection - is complicated by the nature of satellite measurements, which detect the presence of liquid water rather than the physical process of melting.This study explores a novel method for estimating surface melt rates across Antarctica by calibrating passive microwave data from the Special Sensor Microwave Imager/Sounder (SSMIS) with in-situ observations of surface melt collected by Automatic Weather Stations (AWS).Binary melt days were identified using SSMIS 19GHz brightness temperature thresholds carefully calibrated against AWS data from diverse Antarctic regions, including the Larsen C, Baudouin, and Ekström ice shelves. A quantitative relationship was established to link the number of melt days to the melt quantities measured at AWS sites, offering a first approximation of annual melt rates. The methodology emphasizes spatial coherence and compatibility across datasets and offers insights into regional variations in melt processes.We suggest that this approach has the potential to improve the detection of melt days and provide estimates of melt rates from space rather than merely identifying melt occurrence. The study underscores the significance of AWS calibration, while also acknowledging the uncertainties in both the data and the methodology. This framework represents a step forward in understanding melt dynamics in Antarctica and contributes to the development of tools for long-term operational monitoring of surface melt, as well as offering an independent estimate of surface melt over the past 45 years since the onset of the satellite era.

Year:

2025

Perennial firn aquifers in Greenland are crucial for meltwater storage, significantly influencing ice-sheet hydrology. In Antarctica, although firn aquifers have been identified in situ, a comprehensive continent-wide overview is currently lacking. Using an advanced methodology that integrates multiple datasets, our pioneering study presents a 2 x 2 km resolution assessment of firn aquifer distribution in Antarctica.The focal point of our analysis is the creation of a heat map of firn aquifer locations across Antarctica. In contrast to prior studies, reliant on traditional binary evaluations of aquifer presence or absence, our method addresses the inherent uncertainty associated with firn aquifer extent and overcoming challenges posed by the vast and remote Antarctic environment.We use a Monte Carlo method that exploits multiple datasets as input, spanning from 2017 to 2021. Data includes Sentinel-1, Advanced SCATterometer (ASCAT), and statistically downscaled output from the RACMO2.3p2 climate model. Each of these datasets highlights a particular property of firn aquifers.Our high-resolution heat map reveals a concentration of firn aquifers across the Antarctic Peninsula (AP). Elevated probabilities are observed along its northern, northwest, and western coastlines, as well as on the Wilkins, Müller, and part of George VI ice shelves. Beyond the AP, aquifer evidence is sparse, with only a few locations exhibiting slightly elevated probabilities, such as on the Abbot, Shackleton, and Holmes ice shelves.Validation of the methodology applied in Greenland using Operation IceBridge (OIB) data demonstrates a 91% correspondence with observed aquifers, firmly establishing the robustness of our approach.Leveraging the sustained accessibility of freely available C-band and scatterometer observations, complemented by modeling data, our approach allows for ongoing long-term monitoring of aquifer conditions, proving crucial to explore the response of the Antarctic ice sheet to climate change.

Year:

2025

Perennial firn aquifers (PFAs) are year-round bodies of liquid water within firn. In Antarctica, they can cause hydrofracturing of ice shelves, leading to accelerated ice-sheet mass loss. PFAs were only recently discovered in the Antarctic Peninsula, at locations with high melt and snow accumulation rates. Likely, PFAs will expand in the future as both snowfall and melt increase. So far, this has not been considered when assessing the future vulnerability of Antarctic ice shelves. One could use a firn model to predict future Antarctic PFA evolution, but to do so for a wide range of climatic forcings is computationally expensive. Therefore, we set up a random forest emulator. The emulator represents both firn and surface climate processes, so that only 2 metre temperature and precipitation are required as input. To train the emulator, we use simulations of three scenarios (SSP1-2.6, SSP2-4.5 and SSP5-8.5) from firn densification model IMAU-FDM forced by the regional climate model RACMO2, which was driven by CESM2 in turn. The emulator successfully explains 98% of the PFAs variation, therefore we use its versatility and speed to predict Antarctic PFA evolution for 15 additional RCM/GCM model forcings. We find a range of solutions, highlighting the usefulness of the emulator. Until 2100, PFA occurrence remains restricted to ice shelves in the Antarctic Peninsula for SSP1-2.6 and SSP2-4.5. For SSP5-8.5, PFAs expand to the Bellingshausen Sea region in West-Antarctica, and to Enderby Land in East-Antarctica. The meteorological conditions in Enderby Land exhibit similarities to those observed in the Antarctic Peninsula. In contrast, Getz ice shelf, which experiences high snow accumulation rates, remains insensitive to PFA formation, because it is rather cold. Our results highlight the sensitivity of relatively warm, high-accumulation ice shelves to future PFA formation and subsequent hydrofracturing.

Year:

2025

Perennial firn aquifers (PFAs) are year-round bodies of liquid water within firn, which modulate meltwater runoff to crevasses, potentially impacting ice-shelf and ice-sheet stability. Recently identified in the Antarctic Peninsula (AP), PFAs form in regions with both high surface melt and snow accumulation rates, and are expected to expand due to the anticipated increase in melt and snowfall. Using a firn model to predict future Antarctic PFAs for multiple climatic forcings is computationally expensive. To overcome this, we developed an XGBoost emulator, a fast machine learning model, to approximate a firn model. The PFA emulator was trained with simulations from the firn densification model IMAU-FDM, forced by three emission scenarios (SSP1-2.6, SSP2-4.5 and SSP5-8.5) of the combined regional climate model (RCM) RACMO2.3p2 and general circulation model (GCM) CESM2. Using a scenario and spatial blocking evaluation approach, we found that the emulator successfully explains at least 89 % of PFA presence and meltwater storage variance. Using the PFA emulator, we predict future PFAs (2015–2100) for nine additional forcings from the RCMs MAR and HIRHAM in combination with five GCMs. Under SSP1-2.6 and SSP2-4.5, PFAs remain mostly restricted to the AP. For SSP5-8.5, PFAs expand to Ellsworth Land in West Antarctica, and Enderby Land in East Antarctica. For climatic forcings from RACMO and MAR, we find that liquid water input (melt and rain) and snow accumulation are good predictors for PFA occurrence. However, HIRHAM predicts considerably less surface melt and accumulation for a given temperature than MAR and RACMO do, resulting in less realistic PFA predictions. Overall, our findings show that PFAs will likely expand in a warmer Antarctica, irrespective of the emission scenario.

Year:

2024

Due to increasing air temperatures, surface melt and meltwater runoff expand to ever higher elevations on the Greenland ice sheet and reach far into its firn area. Here, we evaluate how two regional climate models (RCMs) simulate the expansion of the ice sheet runoff area: MAR, and RACMO with its offline firn model IMAU-FDM. For the purpose of this comparison we first improve an existing algorithm to detect daily visible runoff limits from MODIS satellite imagery. We then apply the improved algorithm to most of the Greenland ice sheet and compare MODIS to RCM runoff limits for the years 2000 to 2021. We find that RACMO/IMAU-FDM runoff limits are on average somewhat lower than MODIS and show little fluctuations from year to year. MAR runoff limits are substantially higher than MODIS, but their relative fluctuations are more similar to MODIS. Both models apply a bucket scheme where meltwater is routed vertically. On the example of the K-transect we demonstrate that differences in the implementation of the bucket scheme are responsible for the disparity in RCM simulated runoff limits. The formulation of the runoff condition is of large influence: in RACMO/IMAU-FDM meltwater is only considered runoff when it reaches the bottom of the simulated firn pack; in MAR runoff can also occur from within the firn pack, which largely causes its higher runoff limits. We show that total runoff along the K-transect, simulated by the two RCMs, diverges by up to 29 % in extraordinary melt years. Out of this, three quarters are caused by the differences in the simulated runoff limits, the remainder being mostly due to differences in simulated ablation area runoff. Consequently, accurate simulation of meltwater hydrology in a melting firn area is essential to assess Greenland's current and future mass changes.

Year:

2024

Year:

2022

Collaborators (12)

Carleen Reijmer

Associate Professor

Utrecht University

NETHERLANDS
View details

Andrew Tedstone

Assistant Professor (SNF)

University of Bristol

UNITED KINGDOM
View details

Horst Machguth

Assistant/titular Professor

University of Fribourg

SWITZERLAND
View details

Willem Jan van de Berg

Assistent Professor

Utrecht University

NETHERLANDS
View details

Christoph Kittel

University of Liege

BELGIUM
View details

X. Fettweis

Full Prof

University of Liege

BELGIUM
View details

Michiel Roland van den Broeke

Utrecht University

NETHERLANDS
View details

Max Brils

Northumbria University

UNITED KINGDOM
View details

Brice Noël

-

BELGIUM
View details

Walter Immerzeel

Professor

Utrecht University

NETHERLANDS
View details

Maurice Van Tiggelen

Utrecht University

NETHERLANDS
View details

Sophie de Roda Husman

Delft University of Technology

NETHERLANDS
View details