Ayse Kaslilar
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (6)
The Swedish National Seismic Network (SNSN) in collaboration with the Swedish Transport Administration (STA) and Luleå University of Technology is currently studying how to incorporate DAS data from the railway system into the processing at the SNSN. A test data set consisting of both DAS and nodal data was collected in August 2024 along 15 km of railway passing the Kirunavaara underground iron mine in northernmost Sweden. During a three day period, the cable and instruments recorded blasts and induced events from the mine, as well as a more distant earthquake occurring along the Pärvie fault. Here we present analyses of the events using DAS data, a comparison of DAS and nodal data and various strategies to add DAS data to the SNSN processing. We will also discuss how data sharing between the Transport Administration and SNSN can be realized in future near real-time operations as the railway implements DAS technology.
Year:
2025
Fiber-optic distributed acoustic sensing (DAS) has become a standard tool in borehole monitoring and earthquake seismology, with its applications expanding into other areas. Recent studies demonstrate the use of surface-DAS (S-DAS) arrays for reflection seismic imaging and both passive and active source surface-wave analysis and inversion. S-DAS offers high sensitivity in low frequencies and denser channel sampling than conventional geophone arrays. However, it also presents challenges of directional sensitivity along the fiber and difficult, nonuniform fiber-ground coupling. Understanding these challenges is crucial for the further development of S-DAS applications.In June 2022, a seismic field campaign was conducted at a hardrock mineral exploration site in Blötberget, central Sweden. The campaign utilized a broadband vibroseis source with a 2-200 Hz linear sweep and diverse collocated receivers, including S-DAS, 3-component (3C) 10 Hz geophone arrays, and vertical component broadband MEMS accelerometers. The receivers were arranged in a 2D profile with 5 m receiver and source spacing, except for the 3C geophones, which were spaced at 10 m intervals. The approximately 2000 m long line was primarily deployed for active source reflection seismics, but seismic data were also recorded passively for ambient noise surface-wave analysis.This study focuses on the fiber's directional sensitivity and the application of S-DAS for surface-wave analysis and inversion. We compare our results to the active-source 3C geophone data and the vertical accelerometer data (both active and passive). We attempt to quantify S-DAS's response compared to other recording systems and evaluate its applicability for retrieving dispersion curves of surface waves. Results suggest phase consistency between different arrays and an increased resolution of the surface-wave phase-shift array in S-DAS data.Acknowledgements: This work is partly supported by the Smart Exploration Research Centre. The center has received funding from the Swedish Foundation for Strategic Research (SSF) under grant agreement no. CMM22-0003. This is publication SE25-002.
Year:
2025
The increasing need for mineral resources and critical rare earth elements (REE) due to the transition to clean energy has attracted interest in mine wastes as they may contain significant amounts of REE that were not of interest in the past but are today. Detailed knowledge about the 3D geometry and size of the waste deposits and their mineral content is important to understanding whether waste tailings can serve as a secondary resource, contributing to the energy transition, sustainability, and the circular economy, and promoting recycling. Geophysical methods can provide information on the geometry, and help to characterize and estimate the size of the mine waste. In the last two decades developments in sensor and computational technology have enabled cost-effective and environmentally friendly seismic ambient noise methods to be widely applied for imaging the subsurface. Among others, one of the ambient noise methods is the horizontal-to-vertical spectral ratio (HVSR) method, which is an efficient technique widely used for site characterization, estimating the thickness of overburden above bedrock, monitoring landslide, and examining the stability of tailing dams.In this study, ambient noise data and the HVSR method are used to estimate the thickness and delineate the 3D geometry of mine tailings. We use three-component (3C) ambient noise data that we collected with 50m spacing between the sensors and profiles in one of the non-active mine tailings of Nordic Iron Ore in Blötberget, Sweden, which might be a potential resource for REE. We process the 3C data and obtain the fundamental frequency at each receiver location. Moreover, one-component ambient noise data that we collected along two perpendicular profiles with a receiver spacing of 5m are used to estimate the surface wave velocity. Combining the fundamental frequency and velocity information, we calculate the depth of the contrasting interface. We show our preliminary results obtained from ambient noise data and compare them with the previous results from the radio magnetotelluric measurements conducted by Geological Survey of Sweden.This work is part of a project supported by the Geological Survey of Sweden. We gratefully acknowledge this support.
Year:
2025
The advancement of seismic methods is vital for mineral exploration in the ongoing energy transition. In this study, we investigate the application of ambient noise seismic interferometry and surface-wave analysis to characterize the subsurface in a mineral exploration context. We then confirm the results of the passive seismic investigation through an active source experiment. We collected ambient noise data using a 2-D seismic line initially deployed for an active source reflection seismic study. By cross-correlating the signals, we retrieved the surface waves and constructed a 2-D shear-wave velocity profile using conventional surface-wave analysis. We utilized the active source data to establish initial assumptions about the surveyed medium and then validated the passive seismic experiment. The passive seismic results are concordant with the active source results and allow for the interpretation of geological contacts and fault zones. Our work demonstrates the potential of passive seismic methods for investigating local tectonic settings and their role in hardrock mineral exploration.
Year:
2024
We construct a 3-D shear-wave velocity model for the crustal structure and the geometry of the Adana and Iskenderun basins by using ambient noise tomography of Rayleigh waves. For this purpose, we compute interstation Green's functions and measure the group velocity dispersion in the period range of 8–25 s. Then Rayleigh wave group velocity maps obtained by tomographic inversion are used to derive a shear wave velocity model by linearized inversion. Both Rayleigh wave group velocity maps and the 3-D shear-wave velocity structure are correlated with the geology and the major tectonic features of the region. Cross sections taken from the velocity model suggest a sediment thickness of up to 11 km in the wedge-shaped Adana Basin with the velocity ranging between 2.4 and 2.9 km s−1. The horseshoe-like high velocities surrounding the basin correspond to the Taurus Mountains in the west and north, and the Amanos Mountains in the east. In the region, down to a depth of 35 km the crustal velocity varies between 2.9 and 3.7 km s−1. Our investigations reveal the detailed 3-D basin geometry and crustal structure that can be beneficial for hazard assessment, geodynamic modelling as well as hydrocarbon exploration studies.
Year:
2024
Investigating the near‐surface structure of the Earth through geophysical methods is a crucial aspect in many areas of study in geotechnical engineering, environmental science and exploration. Among several geophysical methods, seismic‐based ones are widely used for characterizing near‐surface features that are distinguished by contrasts in elastic parameters. In this paper, we model 3D elastodynamic wave propagation and scattering using a method based on domain‐type integral representation with Born approximation. We calculate the scattered wavefield by considering the first‐order perturbations in density and Lamé parameter contrasts of scatterers. Contrasts in Lamé parameters can be useful for determining the material properties of subsurface structures in cases of weak contrasts in velocities accompanying considerable Lamé parameter variations. We examine the effects of each parameter contrast on a series of models involving a subsurface scatterer. We also compare the seismograms obtained from our method with those from a 3D finite‐difference wavefield modelling program, where we observe good agreement between the modelling results. Sensitivity of the wavefield to the perturbation in each model parameter is also examined by calculating and analysing the Fréchet derivatives. In general, the method discussed here can provide a solid foundation for prospective imaging studies involving density and Lamé parameters simultaneously.
Year:
2022
Collaborators (2)
Alireza MALEHMIR
Professor in applied geophysics
Uppsala University
Christopher Juhlin
Professor
Uppsala University
Make your next move.
Prepare your application
Review drafts before you send them.