Ute Kaiser
Head of group, full professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (5)
Bulk carbon materials can be synthesized through the modulation of precursor structures, stacking mode, and the optimization of pyrolysis conditions. The structure of two-dimensional (2D) carbon materials, however, is mainly driven by the pyrolysis temperature, pressure, and organic gas flow rates. Here, we report the synthesis of a centimeter-sized nanocrystalline graphene monolayer from pyrolyzing a Langmuir monolayer of a hexa(terpyridine)hexaphenylbenzene polyaromatic hydrocarbon (PAH) yielding a 2D carbon material with a thickness of 0.36 ± 0.07 nm. By designing the amphiphilic PAHs and reducing intermolecular π-π stacking interactions, a monolayer of horizontally aligned PAH was obtained at the water-air interface. During the pyrolysis, the monolayer served as a molecularly thin solid carbon source, leading to the controlled preparation of an electrically insulating nanocrystalline graphene monolayer. Our work proposes a 2D carbon material formed from the initial assembly of PAH monolayer at the water-air interface and subsequent pyrolysis and offers a modular strategy for designing nanocrystalline 2D films.
Year:
2026
Controlling the nanoscale organization of photosensitizer–catalyst (PS–CAT) assemblies into high-surface-area superstructures holds great promise for enhancing photochemical energy conversion yet remains a formidable challenge. We report the nanoconfined deposition of supramolecular photoactive architectures solely composed of cobaloxime-based catalytic salts (CAT) and an imidazophenanthroline-containing ruthenium photosensitizer (PS) salt using via scanning electrochemical cell microscopy (SECCM). This nanoconfinement strategy enables the controlled formation of PS–CAT supramolecular structures ranging from nanospots to nanowires with a diameter of approx. 80–100 nm that catalyze light-driven hydrogen evolution in the absence of covalent linkers. The supramolecular nanowires, formed solely by tuning the nanopipette retraction speed from the surface, exhibit markedly enhanced photoactivity and stability compared to deposited nanospots using the same PS − CAT ratio. Correlative time-of-flight secondary ion mass spectrometry (ToF-SIMS) and nano-infrared (nano-IR) imaging, supported by molecular dynamics simulations, revealed distinct molecular changes of the different nanostructures, highlighting the crucial role of PF₆⁻ − the counterion of the PS − in stabilizing the supramolecular framework. The presented approach allows designing an optimum arrangement of PS − CAT freestanding supramolecular architectures for improved stability and activity without the need for scaffolds and bridging ligands.
Year:
2025
An ideal proton exchange membrane should only permeate protons and be leak-tight for fuels. Graphene is impermeable to water and poorly conducting to protons. Next to long-term stability an ideal and optimized proton exchange membrane therefore needs to fulfil two main criteria: proton permeability and selectivity. Within methanol fuel cells, the first ensures a high-power density, while the second prevents fuel cross-over between the electrodes, which deteriorates catalyst performance and, thereby, drastically lowers performance. However, proton conductivity and selectivity are antagonistic in polymer membranes concerning their performance1. Long channel length in state-of-the-art membranes such as Nafion 117 is therefore a prerequisite to obtaining proton selectivity, at the cost of an additional ionic resistance through such long channels. Pristine graphene2 already fulfils these two criteria, partly as the graphene basal plane is impermeable to water and other molecules3, and exhibits a certain degree of proton conductivity4, influenced by nanoscaled ripples5, corrugations6, particularly in monolayer graphene oxide7 and hydrogenated graphene8. Here, we chemically functionalized monolayer graphene to install sulfophenylated sp3 dislocations by diazotization. Selective to protons, transmembrane areal conductances surpass those of polymer membranes, while providing proton selectivity over methanol through such an atomically thin layer. By creating proton-conductive and selective paths through graphene, we unveil a covalent chemical route to rationalize transmembrane proton transport through 2D materials.
Year:
2024
Using advanced in situ transmission electron microscopy, the lithiation and delithiation processes into graphene sheets are studied and significant differences are detected in the structural evolution of the system. Thin fcc lithium crystals with faceted shapes are formed between graphene sheets during lithiation, but are transformed into irregular patches during delithiation. It is found that defects such as vacancies in graphene and impurity atoms play the key role in these processes. Specifically, during intercalation the lithium crystals nucleate at vacancies in graphene, while upon delithiation the impurity oxygen atoms initially embedded at octahedral interstitial positions inside the lithium crystals agglomerate at the edges of the crystals, thus giving rise to the formation of amorphous lithium oxide patches, where lithium ions are trapped.
Year:
2024
The availability of efficient electrocatalysts is key to the development of next-generation electrolyzers for water splitting to produce so-called ‘green hydrogen’ for a future hydrogen economy. The oxygen-evolution reaction (OER) is one half of the water-splitting reaction and is slow at most electrocatalysts. Designing inexpensive, sustainable, stable, and high-performance OER electrocatalysts remains the largest obstacle hindering the development of new electrolyzers. Carbon-coated metal/metal oxide (nano)particles have been used in such applications, but the role played by the carbon coatings in electrocatalysis has provoked debate in the field and is poorly understood. We show here that the carbon coating itself acts as the active site in OER, with the underlying material activating the carbon through a charge-transfer mechanism. We demonstrate this phenomenon using model catalysts consisting of < 2 nm metal-oxide electrocatalyst nanoparticles encapsulated within single-walled carbon nanotubes (SWNTs). Access of electrolyte to the encapsulated metal oxides is blocked by plugging the SWNTs with fullerenes, which shuts off redox processes inherent to the metal oxide but does not affect catalytic activity, showing that the carbon surface is the active OER site. This analysis is supported by electrochemical analysis, which shows that the rate-determining step for the OER is the same at SWNT with and without encapsuled metal oxides, but different to that at bare metal oxides. In-situ electrochemical Raman spectroscopy and computational analysis demonstrate that charge transfer from the carbon host to the metal oxide occurs during the OER. This charge transfer results in a decrease in electron density on the carbon surface, which may facilitate binding of –OH to the carbon surface, the first step in the OER and the RDS (as determined by electrochemical analysis) and may be key to the activity of carbon coated electrocatalysts. This understanding of how carbon coatings play an active role in electrocatalytic reactions is crucial for the development of future low cost, sustainable electrocatalysts for the OER, and the proposed charge transfer-driven mechanism could be tuneable to both oxidative and reductive reactions.
Year:
2024
Collaborators (19)
Boris Mizaikoff
Chaired Professor and Director of Institute
Ulm University
Xinliang Feng
Max Planck Institute of Microstructure Physics
Darren Walsh
Prof at University of Nottingham
University of Nottingham
Christine Kranz
Ulm University
José J Baldoví
University of Valencia
Lee R. Johnson
University of Nottingham
Andrei Khlobystov
Professor of Nanomaterials
University of Nottingham
Sven Rau
Professor
Ulm University
Jan Philipp Hofmann
Professor
Technische Universität Darmstadt
Graham Newton
Prof at University of Nottingham
University of Nottingham
Francesco Buda
Leiden University
Thomas Heine
Professor of Chemistry (part-time)
Yonsei University
Clement Maheu
Institut des Matériaux Jean Rouxel
Max von Delius
Professor
Ulm University
Haoyuan Qi
Technische Universität Dresden
Volker Deckert
Department head
Leibniz Institute of Photonic Technology
Alexander Mengele
Universität Ulm
Grégory F. Schneider
-
G. J. Agur Sevink
Leiden University
Make your next move.
Prepare your application
Review drafts before you send them.