Grégory F. Schneider

Country flagNetherlands

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (5)

Bulk carbon materials can be synthesized through the modulation of precursor structures, stacking mode, and the optimization of pyrolysis conditions. The structure of two-dimensional (2D) carbon materials, however, is mainly driven by the pyrolysis temperature, pressure, and organic gas flow rates. Here, we report the synthesis of a centimeter-sized nanocrystalline graphene monolayer from pyrolyzing a Langmuir monolayer of a hexa(terpyridine)hexaphenylbenzene polyaromatic hydrocarbon (PAH) yielding a 2D carbon material with a thickness of 0.36 ± 0.07 nm. By designing the amphiphilic PAHs and reducing intermolecular π-π stacking interactions, a monolayer of horizontally aligned PAH was obtained at the water-air interface. During the pyrolysis, the monolayer served as a molecularly thin solid carbon source, leading to the controlled preparation of an electrically insulating nanocrystalline graphene monolayer. Our work proposes a 2D carbon material formed from the initial assembly of PAH monolayer at the water-air interface and subsequent pyrolysis and offers a modular strategy for designing nanocrystalline 2D films.

Year:

2026

Nanopores in 2D membranes like graphene have great potential for applications such as single‐molecule sensing, ion sieving, and harvesting osmotic power. A critical challenge, however, has been to ensure the stability of these nanofluidic transmembrane devices, as the ultrathin graphene membranes tend to delaminate and peel away from their substrates when exposed to aqueous solutions. In this study, it is shown that using a pyrene‐based coating prevents delamination and allows graphene to remain freestanding over a SiN aperture for several days in an electrolyte. The pyrene molecules interact strongly with the graphene through π–π bonding, adhering the graphene to the substrate. Additionally, the pyrene‐based adhesion layer remarkably increases the success rates of the graphene transmembrane devices from 4% to 76.2%. The results underscore the importance of using adhesion layers to enhance the stability of graphene in nanofluidic devices and prolong their operational lifespan. It enables the development of more robust graphene‐based nanofluidic devices for a wide range of applications necessitating free‐standing graphene.

Year:

2025

The gas-phase mid-IR spectra of cationic 1,5,9-triazacoronene and two of its cationic derivatives are presented. Their spectra suggest a possible contribution of polycyclic aromatic nitrogen heterocycles to the interstellar aromatic infrared bands.

Year:

2024

An ideal proton exchange membrane should only permeate protons and be leak-tight for fuels. Graphene is impermeable to water and poorly conducting to protons. Next to long-term stability an ideal and optimized proton exchange membrane therefore needs to fulfil two main criteria: proton permeability and selectivity. Within methanol fuel cells, the first ensures a high-power density, while the second prevents fuel cross-over between the electrodes, which deteriorates catalyst performance and, thereby, drastically lowers performance. However, proton conductivity and selectivity are antagonistic in polymer membranes concerning their performance1. Long channel length in state-of-the-art membranes such as Nafion 117 is therefore a prerequisite to obtaining proton selectivity, at the cost of an additional ionic resistance through such long channels. Pristine graphene2 already fulfils these two criteria, partly as the graphene basal plane is impermeable to water and other molecules3, and exhibits a certain degree of proton conductivity4, influenced by nanoscaled ripples5, corrugations6, particularly in monolayer graphene oxide7 and hydrogenated graphene8. Here, we chemically functionalized monolayer graphene to install sulfophenylated sp3 dislocations by diazotization. Selective to protons, transmembrane areal conductances surpass those of polymer membranes, while providing proton selectivity over methanol through such an atomically thin layer. By creating proton-conductive and selective paths through graphene, we unveil a covalent chemical route to rationalize transmembrane proton transport through 2D materials.

Year:

2024

For a trap-free single layer single carrier (hole-only or electron-only) organic device of thickness d, dielectric constant εr, and mobility μ, the relation of current density j with voltage V is described by the well-known Mott–Gurney equation, j=9ε0εrμV2/8d3, which can be rewritten as j=GV, where G=9ε0εrμ/8d3 can be called space-charge limited (SCL) conductance. We investigated the current–voltage characteristics of vertical organic heterojunction phototransistors based on graphene as the source and C60/copper phthalocyanine (CuPc) heterojunction as the photoactive layer. We found that the drain current vs drain voltage (Id-Vd) characteristic is composed of two distinct SCL conductions with SCL-conductance being strongly dependent on the gate voltage and illumination intensity. At low gate voltages, the Id-Vd curve can be divided into two sections of SCL current conduction with different SCL-conductance: the lower conductance in the lower drain voltage range and the higher conductance in the higher drain voltage range. Both low and high SCL-conductance increase with the gate voltage and illumination intensity. However, as the gate voltage increases to a certain threshold, the two SCL sections unify to only one with the conductance being between them. Our findings implicate that the current conduction of an ideal vertical organic phototransistor (VOPT), whose source/organic interface contact is Ohmic and organic semiconductor is trap free, can be well modeled by the SCL conduction theory with carrier density dependent mobility, which is strongly related to the gate voltage and illumination intensity, and that the mobility of VOPTs at a certain gate voltage can be extracted by the Mott–Gurney equation.

Year:

2022

Collaborators (12)

Ute Kaiser

Head of group, full professor

Universität Ulm

GERMANY
View details

Jos Oomens

Full Professor

Radboud University

NETHERLANDS
View details

Xinliang Feng

Max Planck Institute of Microstructure Physics

GERMANY
View details

Giel Berden

Radboud Universiteit Nijmegen Institute for Molecules and Materials

NETHERLANDS
View details

Jan Philipp Hofmann

Professor

Technische Universität Darmstadt

GERMANY
View details

Francesco Buda

Leiden University

NETHERLANDS
View details

Thomas Heine

Professor of Chemistry (part-time)

Yonsei University

SOUTH KOREA
View details

Clement Maheu

Institut des Matériaux Jean Rouxel

FRANCE
View details

Haoyuan Qi

Technische Universität Dresden

GERMANY
View details

Jordy Bouwman

University of Colorado Boulder

UNITED STATES
View details

Jonathan Martens

Radboud University

NETHERLANDS
View details

G. J. Agur Sevink

Leiden University

NETHERLANDS
View details