Xinliang Feng
Has grant
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Recent Grants
Grant: Close
Graphene Flagship
Open Date: 2018-04-01
Close Date: 2020-03-01
Grant: Close
EnhanceNano
Open Date: 2018-01-01
Close Date: 2020-12-01
Grant: Close
Graphen-Zentrum Dresden (GRAPHD)
Open Date: 2016-07-01
Close Date: 2019-06-01
Articles (24)
Year:
2026
Year:
2026
Bulk carbon materials can be synthesized through the modulation of precursor structures, stacking mode, and the optimization of pyrolysis conditions. The structure of two-dimensional (2D) carbon materials, however, is mainly driven by the pyrolysis temperature, pressure, and organic gas flow rates. Here, we report the synthesis of a centimeter-sized nanocrystalline graphene monolayer from pyrolyzing a Langmuir monolayer of a hexa(terpyridine)hexaphenylbenzene polyaromatic hydrocarbon (PAH) yielding a 2D carbon material with a thickness of 0.36 ± 0.07 nm. By designing the amphiphilic PAHs and reducing intermolecular π-π stacking interactions, a monolayer of horizontally aligned PAH was obtained at the water-air interface. During the pyrolysis, the monolayer served as a molecularly thin solid carbon source, leading to the controlled preparation of an electrically insulating nanocrystalline graphene monolayer. Our work proposes a 2D carbon material formed from the initial assembly of PAH monolayer at the water-air interface and subsequent pyrolysis and offers a modular strategy for designing nanocrystalline 2D films.
Year:
2026
Two-dimensional polymers (2DPs), comprising mono- or multilayer covalent polymeric networks with long-range order in two orthogonal directions, are of considerable interest due to their unique physicochemical properties. However, achieving precise thickness control from monolayer to bilayer, crucial for exploring proximity effect-driven phenomena beyond the monolayer limit, remains synthetically challenging. Here we report the on-water surface synthesis of crystalline mechanically interlocked monolayer and bilayer 2DP (MI-M2DP and MI-B2DP) films by embedding macrocyclic molecules with one and two cavities into 2DP backbones. The incorporation of bulky macrocyclic molecules introduces periodic mechanical bonds that precisely control interlayer interlocking, enabling selective monolayer or bilayer 2DP formation. Both MI-M2DP and MI-B2DP exhibit homogeneous, large-area films with ordered hexagonal pores and high modulus. MI-B2DP demonstrates an exceptionally high effective Young’s modulus of 151 ± 16 GPa (indentation method), surpassing MI-M2DP (90 ± 14 GPa), van der Waals-stacked MI-M2DPs (46 ± 11 GPa) and other reported multilayer 2DPs (<50 GPa). Modelling confirms that the mechanical interlocking minimizes interlayer sliding and reinforces the structure.
Year:
2025
On‐water surface synthesis has emerged as a powerful approach for constructing thin‐layer, crystalline 2D polyimines and their layer‐stacked covalent organic frameworks. This is achieved by directing monomer preorganization and subsequent 2D polymerization on the water surface. However, the poor compatibility of water with many organic monomers has limited the range of accessible 2D polyimine structures. Herein, the on‐liquid surface synthesis of crystalline 2D polyimine films from a water‐insoluble, C 3 ‐symmetric monomer previously deemed incompatible with aqueous systems is reported. In situ grazing incidence X‐ray scattering reveals a stepwise evolution of monomer adsorption, preorganization, and 2D polymerization assisted by the fluorinated surfactant monolayer, leading to the formation of large‐area, face‐on‐oriented 2D polyimine films. Notably, a pronounced lattice expansion from 3.4 nm in the monomer assembly to 5.3 nm in the 2D polyimine framework is observed, highlighting the templating effect of the preorganized monomers in defining the final crystallinity. The representative 2DPI‐TCQ‐DHB is obtained as free‐standing thin film with well‐defined hexagonal pores, mechanical robustness, and a negatively charged surface (zeta potential: −58.8 mV). Leveraging these structural characteristics, it is integrated 2DPI‐TCQ‐DHB films into osmotic power generators, achieving a power density of 16.0 W m −2 by mixing artificial seawater and river water, surpassing most nanoporous 2D membranes.
Year:
2025
The synthesis of thin crystalline two-dimensional polymers (2DPs) typically relies on reversible dynamic covalent reactions. While substantial progress has been made in solution-based and interfacial syntheses, achieving 2DPs through irreversible carbon-carbon coupling reactions remains a formidable challenge. Herein, we present an on-liquid surface (a mixture of N,N-dimethylacetamide and water, DMAc-H 2 O) synthesis method for constructing diyne-linked 2DP (DY2DP) crystals via Glaser coupling, assisted by a perfluoro-surfactant (PFS) monolayer. In-situ spectroscopic and diffraction techniques reveal that the well-ordered PFS monolayer facilitates the accumulation of Cu + ions and subsequent vertical coupling of acetylenic monomers on the DMAc-H 2 O surface. Building on these findings, we successfully synthesized micro-scale rod-shaped DY2DP-Por or graphdiyne (GDY) crystals through the polymerization of porphyrin- or benzene-based monomers, respectively. Our study represents a significant advancement in the field of on-liquid surface chemistry and opens up enormous opportunities for constructing C—C bond linked 2DP crystals with unique functionalities.
Year:
2025
In metal–organic coordination polymers, metal ions can adopt square-planar or tetrahedral geometries, affecting electronic properties. These configurations are studied via AFM, XPS, and DFT modelling to compare structural and electronic differences.
Year:
2025
Two-dimensional (2D) covalent organic frameworks (COFs), as stacked 2D polymers, have emerged as promising semiconductors with tunable structures and functionalities, offering significant potential in optoelectronics. Achieving in-plane anisotropy in their electronic and optical properties is particularly desirable for applications in electronics, thermoelectrics, and photonics but remains a considerable challenge with existing design and synthesis approaches. Here, we present a novel design strategy to introduce intralayer anisotropy in 2D conjugated COFs (2D aniso-c-COFs) using nodes with large in-plane quadrupole moment imbalances and identical linkers. By rationally designing twelve 2D aniso-c-COFs based on benzodithiophene (BDT) nodes, we impose a highly anisotropic electronic structure that results in unprecedented bidirectional charge transport, where electrons and holes preferentially migrate along divergent directions. These COFs exhibit remarkable charge mobilities, reaching up to 1200 cm 2 V − 1 s − 1 for electrons and 200 cm 2 V − 1 s − 1 for holes, as predicted by Boltzmann transport theory. Parallel to electronic anisotropy, these materials show pronounced optical anisotropy, including giant birefringence (|Δ n | > 1.0) and linear dichroism (|Δ k | > 1.3), which are unprecedented in COFs, enabling selective polarization control and tunable optical responses. Guided by these insights, we synthesized a representative 2D aniso-c-COF, TBDT-P-CN, and experimentally demonstrated its high intrinsic charge mobility. These results establish anisotropic 2D conjugated COFs as a unique platform for bidirectional charge transport and polarization-sensitive optoelectronic applications, paving the way for future advancements in organic crystalline materials.
Year:
2025
Triangulene and its homologues are promising building blocks for high‐spin low‐dimensional networks with long‐range magnetic order. Despite the recent progress in the synthesis and characterization of coupled triangulenes, key parameters such as the number of organic linking units or their dihedral angles remain scarce, making further studies crucial for an essential understanding of their implications. Here, we investigate the synthesis and reactivity of two triangulene dimers linked by two ( Dimer 1 ) or one ( Dimer 2 ) para ‐biphenyl units, respectively, on a metal surface in an ultra‐high vacuum environment. First‐principles calculations and model Hamiltonians reveal how spin excitation and radical character depend on the rotation of the para ‐biphenyl units. Comprehensive scanning tunneling microscopy (STM) in combination with density functional theory (DFT) calculations confirm the successful formation of Dimer 1 on Au(111). Non‐contact atomic force microscopy (nc‐AFM) measurements resolve the twisted conformation of the linking para ‐biphenyl units for Dimer 1 . On the contrary, the inherent flexibility of Dimer 2 induces the planarization of the para ‐biphenyl, resulting in the spontaneous formation of two additional five‐membered rings per dimer connected by a single C−C bond ( Dimers 2′ ). Furthermore, scanning tunneling spectroscopy (STS) measurements confirm the antiferromagnetic (S=0) coupling of the observed dimers, underscoring the critical influence of dihedral angles and structural flexibility of the linking units in π‐electron magnetic nanostructures.
Year:
2025
Blue energy between seawater and river water is attracting increasing interest, as one of the sustainable and renewable energy resources that can be harvested from water. Within the reverse electrodialysis applied in blue energy conversion, novel membranes with nanoscale confinement that function as selective ion transport mediums are currently in high demand for realizing higher power density. The primary challenge lies in constructing well‐defined nanochannels that allow for low‐energy barrier transport. This work proposes a concept for nanofluidic channels with a simultaneous dual electrostatic effect that can enhance both ion selectivity and flux. To actualize this, this work has synthesized propidium iodide‐based two‐dimensional polymer (PI‐2DP) membranes possessing both skeleton charge and intrinsic space charge, which are spatially aligned along the ion transport pathway. The dual charge design of PI‐2DP significantly enhances the electrostatic interaction between the translocating anions and the cationic polymer framework, and a high anion selectivity coefficient (≈0.8) is reached. When mixing standard artificial seawater and river water, this work achieves a considerable power density of 48.4 W m −2 , outperforming most state‐of‐the‐art nanofluidic membranes. Moreover, when applied between the Mediterranean Sea and the Elbe River, an output power density of 42.2 W m −2 is achieved by the PI‐2DP. This nanofluidic membrane design with dual‐layer charges will inspire more innovative development of ion‐selective channels for blue energy conversion that will contribute to global energy consumption.
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Collaborators (29)
Minghao Yu
Academic Staff
Technische Universität Dresden
Ute Kaiser
Head of group, full professor
Universität Ulm
Quanquan Guo
Max Planck Institute of Microstructure Physics
Hai Wang
Professor assistant
Utrecht University
Lukas Muechler
Pennsylvania State University
Stuart Parkin
Director
Max Planck Institute of Microstructure Physics
Andreas Fery
Head of Department
Leibniz-Institut für Polymerforschung eV
Xiao-Ye Wang
Nankai University
Xiaodong Li
Research Professor
University of Science and Technology of China
Pavel Jelínek
Palacký University, Olomouc
Yana Vaynzof
Director
Leibniz Institute for Solid State and Materials Research
Mingchao Wang
Technische Universität Dresden
Gianaurelio (Giovanni) Cuniberti
Member, Principal Investigator
Technische Universität Dresden
Zhen Zhang
Prof
University of Science and Technology of China
Jan Philipp Hofmann
Professor
Technische Universität Darmstadt
DAVID ECIJA
HEAD OF NANOARCHITECTONICS ON SURFACES GROUP
-
Francesco Buda
Leiden University
Stefan C. B. Mannsfeld
-
Thomas Heine
Professor of Chemistry (part-time)
Yonsei University
Clement Maheu
Institut des Matériaux Jean Rouxel
Mischa Bonn
Professor
Max Planck Institute for Polymer Research
Haoyuan Qi
Technische Universität Dresden
Willi Auwärter
-
Zhiyong Wang
Max Planck Institute of Microstructure Physics
Renhao Dong
Technische Universität Dresden
Grégory F. Schneider
-
Changjiang Yi
Max Planck Institute for Chemical Physics of Solids
Vincenzo Palermo
Chalmers University of Technology
G. J. Agur Sevink
Leiden University
Make your next move.
Prepare your application
Review drafts before you send them.