Ali Mirzaghorbanali

In this paper, eight shear tests were carried out utilising a double shear with infilled shear interfaces after determining an appropriate experimental design and modified testing scheme. For this, two rock bolts, 20 and 30 tonnes, were tested with modified double shear testing apparatus at different pretension loads. The infilled test scheme was conducted with 5 mm thick sandy clay infilled shear interfaces. A 40 MPa small aggregate concrete was used for all samples to simulate the host rock. Based on the shear profiles, it was found that all samples followed a three-part failure profile consisting of elastic, strain softening, and failure regions. The results of double shear tests revealed that the 20 tonne rock bolt saw a significant overall decrease of approximately 30% in its failure displacement response as opposed to the 30 tonne samples, which saw a 6% increase. Also, it was concluded that the 30 tonne samples outperformed the 20 tonne rock bolts by up to 30%, irrespective of initial pretension settings. Comparing the physical failure characteristics of the samples found that both the 20 and 30 tonne samples exhibited the same response to increased pretension. As the pretension increased, the angle experienced at the hinge point also increased incrementally.